How to Measure Your Lug Size – Strap Bandits

How to Measure Your Lug Size

How to Measure Your Lug Size
September 1, 2014 Strap Bandits
In How To

Lug measurement involves measuring the lug width which is the interior width measured between the lugs where the watch band fits the watch. It’s best to know this size before you buy a substitute watch band. Imprecise measurement by a few millimeters can cause your strap to a loose fitting or not fit at all. Using a ruler or a pair of calipers is essential. Kindly note that it’s the internal dimension that you need.

The Followings Are The Ways To Measure Your Lug Size:

Lug Width

Many of the bands are available in various shops where lug width arranges them. To determine the lug width, you require for your watch, measure the space between the lugs on your watch from the horn like parts extended from the top and bottom of your watch.

Length of Band

For your watch band to fit appropriately, it’s essential to buy one that’s has the right length for you. To do this, measure the distance of the last watch band that suits you.

Width of Buckle

If you want to use the clip from a former band, perhaps the one that came with your watch, you must focus on the buckle size in the products descriptions. This will need to accord with the inner width of the buckle that you have. Changing the clasps on metal watch bands may not be needed since the sizes are certainly not standard and the interchange is frequently complicated. When you’re changing buckles on straps, take the size of the buckle and the central hole portion into consideration.

Thickness of Band

The thickness of a band is usually only essential from an aesthetic view. Flatter or thin watches go best with thin bands however big strong watches need a thick lengthened band for the design to match each other.

Measuring you lug size. You’ll need a ruler. Many watch bands are determined in millimeters. You also need to understand what to measure. The lugs are the protrusions or tangs which spread from the watch case. The simplest and precise way to determine and measure the watch lugs is by taking away the watch band and putting the watch case on top of your ruler. Bring into line the inner of one watch lug at 0 and take note of the broadest full millimeter at the inner surface of the other watch lug.

Sometimes use a watch strap or watch band which is considerably wider or narrower than your watch lugs. Apparently, it’s simpler to do with a watch band that’s thinner than your lugs. The disadvantage of this is that your watch may go back and forward on the band. You can occasionally fit in a watch band which is a little broader than your watch lugs. The disadvantage to this is that it’s going to pressure the watch band, making it stick out of the surface in-between the lugs.

If you require converting between inches and millimeters, there are some common watch bandwidths that you can measure. Note that some of the changes are estimated and you might have some suppleness with your watch bandwidth. Ensure to always measure your watch lugs if you don’t know the size. It takes a few minutes, and this will ensure that you get a substitute for your watch band that fits accurately.

Comments (0)

Leave a reply

Your email address will not be published. Required fields are marked *

*